Home Page

PBResource News

-----------------------

Ball / Pinballs

Ball Bowler /
Shuffle Alley Parts

Books/Videos

Cabinet Parts

Cleaner/Wax

Coils / Sleeves

Electrical Parts

Game Specific

Manuals/Schematics

Playfield Parts

Rubber Rings
Rubber Ring Kits
Postcaps/Sleeves

Signature Parts

Special When Lit!

Tools/Supplies

Your 1ST Pinball

The Pinball Resource

Bally Flipper Rebuild Kit KT-BFLIP03 Detailed Listing of parts with non-kitted parts.

Parts Found in the Mini Kit
KT-BFLIP03M

Parts Found in the Complete Kit
KT-BFLIP03

Parts Not Found in Kit
KT-BFLIP03
or
KT-BFLIP03M

Bally Mini Kit Parts KT-BFLIP-03M

Flipper Plunger / Link Assembly

2 Flipper Plungers / Link Assemblies A-3714-3 included in Kit
KT-BFLIP-03M

BLY-A3714-3+ $5.39ea

Compression Return Spring

2 Compression Return Springs 10-135 (Substitute for
SP-200-185) included in Kit
KT-BFLIP-03M

WLL-10-135 $0.60ea

Coil Stop

2 Enhanced Coil Stops A613-67 included in Kit
KT-BFLIP-03M

BLY-A613-67+ $5.18ea

Flipper Bushing

2 Flipper Bushings C649-53 included in Kit
KT-BFLIP-03M

BLY-C649-53 $2.13ea

Coil Sleeve

2 Coil Sleeves included in Kit
KT-BFLIP-03M

SLEEVE-BLY-STD $0.75ea

Spring Washer

2 Spring Washer FA605 (Substitute for P-1158-6) included in Kit
KT-BFLIP-03M

GTB-FA605+ $0.46ea

EOS Switch
(High Current)

2 End Of Stoke(EOS) Switches ASW-A20-23 included in Kit
KT-BFLIP-03M

BLY-ASWA2023+ $4.66ea

Screws

4 Screws 8-32-1/4 included in Kit KT-BFLIP-03M

HDW-8-32-1/4 $0.25ea

3/16” C-Ring

2 3/16” C-Rings included in Kit KT-BFLIP-03M

HDW-CRING316 $0.15ea

Bally Complete Kit Parts KT-BFLIP-03
In Addition to the parts from the Mini kit listed above, the complete kit also includes the following

Right Hand Side Lever Assembly

1 Enhanced Right Hand Side Lever Assembly included A-3711-2

Includes 2 FA90 10-32 X 3/8” Socket Head Cap Screws -These screws are larger than the originals and will not work on original lever arms.

BLY-A3711-2+ $9.44ea

Left Hand Side Lever Assembly

1 Enhanced Left Hand Side Lever Assembly included A-3711-3

Includes 2 FA90 10-32 X 3/8” Socket Head Cap Screws -These screws are larger than the originals and will not work on original lever arms.

BLY-A3711-3+ $9.44ea

Allen Wrench

For the 4 FA90 10-32 X 3/8” Socket Head Cap Screws listed above included in Kit
KT-BFLIP-03

Parts NOT Found in Kit
KT-BFLIP-03

Flipper Coils

Varies by game – see your game Manual/Schematic for which ones are used in your game.

Coils we offer are listed here.

EOS Form A Switch

If your game has more than two flippers, the Upper Flippers are probably powered by a EOS FORM A Switch. Look at your game and see if your lower flippers have a stacked switch like AS-982-588.

The stacked switch is a sandwich of the
BLY-ASWA2023 EOS switch listed above and this EOS FORM A Switch ASWA-10-45.

The ASWA-10-45 is a high current switch.

BLY-ASWA1045+ $4.19ea

Lane Change Switch

If your game has a stacked EOS and the second EOS switch is low current switch, its probably a Lane Change Switch. This is the switch the moves the light for the A,B,C Lanes when the flipper button is pushed.

On a High Current switch, the contact is almost as wide as the blade, on a low current switch, the contact is about half the width of the blade.

We offer a substitute for the Lane Change Switch
SW1A-150.

WLL-SW1A-150+ $2.79ea

Flipper Link

For those that don't need the complete Flipper Plunger and Link Assembly A-3714-3, we offer the link only P-1973-408

BLY-P1973-408 $1.85ea

Flipper Stop Bracket

We only offer these USED, P-6665-444

BLY-P6665-444 Out of Stock

Coil Bracket

P108-53
Used on games
Hi-Deal through
Strikes and Spares

BLY-P108-53 Out of Stock

Flipper Plastics and Shoe and Shaft Assemblies

Can be seen Here

Flipper Rubber

Can be seen Here