Home Of The Gottlieb® Factory Parts



Keeping Pinball Affordable since 1977

Home Page

PBResource News

---------------------------

Ball / Pinballs

Ball Bowler /
Shuffle Alley Parts

Books/Videos

Cabinet Parts

Cleaner/Wax

Coils / Sleeves

Current Ads

Electrical Parts

Game Specific

Manuals/Schematics

Playfield Parts

Rubber Rings
Rubber Ring Kits
Postcaps/Sleeves

Signature Parts

Special When Lit!

Stuff

Tools/Supplies

Your 1ST Pinball



The Pinball Resource

Williams Flipper Rebuild Kit KT-WFLIP05 Detailed Listing of parts with non-kitted parts.

Parts Found in the Complete Kit
KT-WFLIP05

Parts Not Found in Complete Kit
KT-WFLIP05

Williams Parts KT-WFLIP-05

Right Flipper Crank Link Assembly

1 Right Flipper Crank Link Assembly
A-15848-R
included in Kit KT-WFLIP-05

WLL-A15848R $7.70ea

Left Flipper Crank Link Assembly

1 Left Flipper Crank Link Assembly
A-15848-L included in Kit KT-WFLIP-05

WLL-A15848L $7.70ea

Compression Spring

2 Compression Springs 10-376 included in Kit KT-WFLIP-05

WLL-10-376+ $0.64ea

Return Spring

2 Return Springs
10-364 included in Kit
KT-WFLIP-05

WLL-10-364+ $0.45ea

Flipper Bushing

2 Flipper Bushings
03-7568
included in Kit KT-WFLIP-05

WLL-03-7568 $0.68ea

Tall Coil Stop

2 Tall Coil Stop Assemblies
A-12390
included in Kit KT-WFLIP-05

*See below for other Coil Stops used in this era of games.

The protrusion into the coil for the Tall Stop is 0.420. *The small but significant changes in the depth of the coil stop will have a noticeable impact on flipper paddle rotation.*


WLL-A12390 $1.30ea

Capacitor 2.2MF 250Volt

2 Substitute 2.2MF 250Volt Capacitors included in Kit KT-WFLIP-05

CAP-2.2MF250V $2.21ea

Plug Bumper

2 Plug Bumpers
23-6577
included in Kit KT-WFLIP-05

WLL-23-6577+ $0.50ea

Coil Sleeve 2-3/16

2 2-3/16” Coil Sleeves included in Kit
KT-WFLIP-05

SLEEVE-WMS-2-3/16 $0.45ea

EOS Switch
(High Current)

2 End Of Stoke(EOS) Switches
03-7811 included in Kit
KT-WFLIP-05

WLL-03-7811+ $5.74ea

Ty Wraps

2 Ty Wraps included in Kit
KT-WFLIP-05

GTB-MP2 $0.20ea

Screws

6 Screws 6-32-3/8 included in Kit
KT-WFLIP-05

HDW-6-32-3/8 $0.20ea

Nuts

6 Nuts 6-32 included in Kit
KT-WFLIP-05

HDW-6-32NUT $0.10ea

Socket Head Cap Screw

4 Screws 10-32-3/8 included in Kit
KT-WFLIP-05

GTB-FA90 $0.20ea

Split Lock Washers
4 #10 Split Lock Washers
4701-00004-00
included in Kit
KT-WFLIP-05


W-47010000400 $0.08ea

Allen Wrench 5/32

For the Crank Link Assembly Socket Head Cap Screw listed above
included in Kit
KT-WFLIP-05


Parts NOT Found in Kit
KT-WFLIP-05

Flipper Coils

Varies by game – see your game Manual/Schematic for which ones are used in your game.

Coils we offer are listed here.


EOS Form A Switch

If your game has more than two flippers, the Upper Flippers are probably powered by a EOS FORM A Switch. Look at your game and see if your lower flippers have a stacked switch like A-8160.

The stacked switch is a sandwich of the DE-180-5018+ EOS switch listed above and this EOS FORM A Switch SW-1A-183.

The SW-1A-183 is a high current switch like the DE-180-5018+.


WLL-SW1A-183+ $3.10ea

Lane Change Switch

If your game has a stacked EOS and the second EOS switch is low current switch, its probably a Lane Change Switch. This is the switch the moves the light for the A,B,C Lanes when the flipper button is pushed. This is used in assemblies like A8087-L and A8087-R.


The stacked switch is a sandwich of the DE-180-5018+ EOS switch listed above and this EOS Lane Change Switch SW1A-150.


WLL-SW1A-150+ $2.79ea

Flipper Plunger/Link

We include a Flipper Plunger/Link assembly in the above A15848 Crank Link Assembly, but it's also offered as a separate part
A-15847

WLL-A15847 $2.30ea

Right Crank

We include a Right Crank in the above A15848 Crank Link Assembly, but it's also offered as a separate part
A-17050R

WLL-A17050R $3.50ea

Right Crank Assembly

B13884-R used on certain games like Bram Stockers Dracula, Creature from the Black Lagoon, Doctor Who, Fishtales, Hurricane, The Addams Family, The Getaway, Twilight Zone, WhiteWater, and Black Rose.

WLL-B13884R $3.50ea

Left Crank

We include a Left Crank in the above A15848 Crank Link Assembly, but it's also offered as a separate part
A-17050L

WLL-A17050L $3.50ea


Left Crank Assembly

B13884-L used on certain games like Bram Stockers Dracula, Creature from the Black Lagoon, Doctor Who, Fishtales, Hurricane, The Addams Family, The Getaway, Twilight Zone, WhiteWater, and Black Rose.

WLL-B13884-L -Out of Stock

Right Base Plate

Right Baseplate B13104.1R


*Note: On some games, you might have to modify the baseplate to use(like taking off a leg)

WLL-B13104-R $9.34ea

Left Base Plate

Left Baseplate B13104.1L


*Note: On some games, you might have to modify the baseplate to use(like taking off a leg)

WLL-B13104-L $9.34ea

Switch Mounting Bracket
Switch Mounting Bracket
01-9375

Attaches with
2 X HDW-8-32 X ¼ Screws (Not Included)

WLL-01-9375 $1.90ea







HDW-8-32-1/4 $0.25ea

Flipper Plunger/ Thin Link

We include a Flipper Plunger/Link assembly in the above A15848 Crank Link Assembly. The Plunger/Link A15847 we include is the same one that Williams offered in their Flipper Rebuild Kit A-13524-1. This is different that the Plunger / Thin Link that the game left the factory with. We also offer the Plunger and Thin Link
A-10656

WLL-A10656+ $3.66ea

Flipper Medium Coil Stop

We include Tall Coil Stop assembly A12390 in the kit. The Tall Coil Stop A12390 we include is the same one that Williams offered in their Flipper Rebuild Kit A-13524-1. This may be different that the Coil Stop that the game left the factory with(but will work fine). We also offer the Medium Coil Stop
A-12111. The protrusion into the coil for the Medium Stop is 0.370. *The small but significant changes in the depth of the coil stop will have a noticeable impact on flipper paddle rotation.*

WLL-A12111 $2.60ea

Flipper Short Coil Stop

We include Tall Coil Stop assembly A12390 in the kit. The Tall Coil Stop A12390 we include is the same one that Williams offered in their Flipper Rebuild Kit A-13524-1. This may be different that the Coil Stop that the game left the factory with(but will work fine). We also offer the Short Coil Stop A-10821. The protrusion into the coil for the Short Stop is 0.330. *The small but significant changes in the depth of the coil stop will have a noticeable impact on flipper paddle rotation.*

WLL-A10821 $2.50ea

Flipper Plastics and Shoe and Shaft Assemblies


Can be seen Here


Flipper Rubber


Can be seen Here


Top

Home Page

EMAIL PBR

How To Order

FAQ

Privacy Policy

©2004-2018 The Pinball Resource